| Wireless
DSL
Although it has
become the broadband technology of choice for many small businesses, home
offices and even residential customers, DSL is not universally available.
Network upgrades to support DSL are progressing more slowly than expected,
service providers are falling by the wayside, and many would-be users are
too far (more than 18,000 feet) from the closest central office. Cable
modems are another option, but such service generally is targeted at home
users who have cable television. So what's left for small businesses not
near central offices? MMDS, a broadband wireless technology that's sometimes
referred to as wireless DSL or by the more generic term broadband wireless,
is a third low-cost option. Sprint Corp. and WorldCom are the two biggest
providers.
Haven't heard about
MMDS? That's probably because service is available in only a small number
of areas. Both Sprint and WorldCom, however, say they plan to increase
the number of regions served within the next year, especially as next-generation
wireless technology becomes available.
MMDS, which operates
in the United States and Canada at 2.5 GHz and in many international markets
at 3.5 GHz, is not the only broadband wireless technology available. Smaller
ISPs are using the 2.4-GHz unlicensed band with wireless LAN-based technologies
successfully. There are also services operating above 10 GHz--frequencies
referred to as millimeter wave, including LMDS (local multipoint distribution
service) at 28 GHz and 38 GHz. However, these are fiber-replacement technologies
intended for higher-density urban areas. Millimeter wave signals can propagate
only a couple of miles reliably; hubs typically are located on top of buildings.
In contrast, an MMDS hub can serve a radius of up to 35 miles, with hubs
typically located on top of mountains or other high points.
Just one tower can
provide coverage to a huge, heavily populated area at relatively low cost
to the service provider. But since a large number of users may share the
same radio channels, data throughputs will be lower than they are for other
broadband wireless options. The net result is practical data throughput
of 500 Kbps to 1 Mbps, ideal for small and midsize business customers as
well as consumers. As for pricing, Sprint Broadband is providing business
MMDS service in the San Jose, Calif., area for $200 per month, which includes
support for six computers, six e-mail accounts and 6 MB of Web space. For
residential customers, Sprint charges $50 per month, though prices may
vary depending on geographic location. As networks mature, prices should
drop.
While using the
service is straightforward, network managers must keep a number of factors
in mind, including availability of service, network capacity and QoS (Quality
of Service).
Using MMDS
The hot application
for MMDS is Internet access; this differs from MMDS' original application
of one-way "wireless cable" service to deliver television programming.
This application never proved popular, and most license holders are concentrating
on data service.
An MMDS connection
is just like any other ISP connection: normally a router port with a connection
for the external ISP network (see "MMDS Architecture"). In the case of
MMDS, this is typically an Ethernet connection to a wireless modem. Alternatively,
some vendors, including Cisco Systems, are providing wireless modem cards
for their routers. A cable runs from the modem to a radio, which connects
to the antenna. The radio and antenna can be combined in one compact unit.
Sprint's dish is diamond shaped, 13.5 by 13.5 inches, about the size of
a pizza box. This antenna is mounted directly on your building or on a
pole and points at the service provider's tower. Future versions of the
technology will omit the line-of-sight requirement.
The ISP's tower
is a hub in a point-to-multipoint architecture that multiplexes communications
from multiple users. This approach differs from many other broadband wireless
connections that operate on a point-to-point basis. The tower has a backhaul
connection to the carrier's network, and the carrier network interconnects
with the Internet. This architecture is fundamentally the same as other
ISP connections, with the wireless link directly replacing a DSL, dedicated
T1 or frame-relay link.
The wireless link
is a dedicated, always-on type of connection, just like DSL. The network
layer is IP, and the radio interface consists of physical and link-layer
protocols designed specifically for the wireless medium. These are derived
from the specification used by cable modems, DOCSIS (Data Over Cable Service
Interface Specification), with enhancements to the physical and MAC (Media
Access Control) layers to address the wireless medium. The MAC layer governs
how multiple users share the same radio channel, whereas the physical layer
handles radio modulation.
Current deployments
use conventional modulation techniques, but forthcoming technology will
be based on VOFDM (Vector Orthogonal Frequency Division Multiplexing),
where the receiver combines reflected signals to produce a stronger signal.
This allows non-line-of-sight operation and, according to Sprint, will
increase coverage from 60 percent to 90 percent of buildings in a coverage
area. It will also simplify the installation of antennas because they will
no longer need to be aligned precisely. OFDM (Orthogonal Frequency Division
Multiplexing) also has significant speed advantages, which it derives by
dividing the radio carrier signal into multiple subcarriers. Because each
subcarrier carries only a portion of the data load, it can do so using
longer symbol periods, which makes the signal less susceptible to multipath
interference (signal reflections). OFDM's magic is also the basis of other
high-performance wireless technologies, such as IEEE 802.11a, a new wireless
LAN standard that delivers a raw speed of 54 Mbps. Although a much better
technical approach, next-generation MMDS equipment based on OFDM is not
yet mature, and carriers will perform trials before wide-scale deployment.
Wireless connections
do raise some security considerations. Providers do not encrypt the airlink--your
data is broadcast in the clear. Although only a highly sophisticated hacker
could intercept traffic, customers deploying sensitive applications should
consider end-to-end security methods, such as VPN tunnels, just as they
would for other types of Internet connections, most of which are not secure
either.
Quality of Service
Users should pay
particular attention to QoS. The wireless link employs forward error correction,
and the frequencies used are largely immune to the weather. Bit-error rates
are comparable to wireline alternatives. Where QoS gets interesting, however,
is with guaranteed throughput. The DOCSIS specification, and hardware vendor
implementations, provide for guaranteed throughput mechanisms. However,
carriers don't always supply these. MMDS uses a point-to-multipoint architecture,
with one radio beam servicing many users. The carrier depends on the statistical
nature of traffic to essentially oversubscribe its customer base.
Sprint Broadband
quotes its service as a 10-Mbps link, with a maximum downlink throughput
of 5 Mbps and typical throughputs of 500 Kbps to 1.5 Mbps, depending on
other customer traffic. (The maximum uplink speed is 256 Kbps.) The key
question is: How many other customers? Until carriers implement QoS measures
in the radio link, actual throughput rates are at risk, and customers will
need to monitor their connection speeds.
What can the service
provider do to manage its capacity and bandwidth? Plenty, including using
narrower and more focused radio beams, adding radio channels, adding cells
and employing more efficient radio technologies (see "Sectoring and Frequency
Management Can Increase Capacity").
Deployment
OK, you're excited
about MMDS. But can you get it? Unfortunately, because the technology is
offered in a limited number of markets, the likely answer is no. Sprint
and WorldCom have invested about a billion dollars each in MMDS licenses,
and both say they are committed to deploying service. Sprint offers service
in Chicago; Colorado Springs, Colo.; Denver; Detroit; Fresno, Calif.; Houston;
Melbourne, Fla.; Oklahoma City; Phoenix; Salt Lake City; San Francisco;
San Jose, Calif.; Tucson, Ariz.; and Wichita, Kan. For its part, WorldCom
offers service only in Baton Rouge, La.; Jackson, Miss.; and Memphis, Tenn.
Another carrier, Nucentrix Broadband Networks, offers service in the southwest
and midwest United States. However, next-generation equipment has yet to
stabilize, so don't expect significant increases in coverage until late
next year. Long term, however, broadband wireless technologies like MMDS
remain an important alternative for those geographical areas where wireline
technologies such as DSL are not available.
(For a list of vendors
that sell multipoint multichannel distribution systems and providers that
offer MMDS services, plus other organizations involved in MMDS, see "Stepping
Stones to MMDS.")
| Stepping
Stones to MMDS |
 |
Here
is a list of vendors that sell multipoint multichannel distribution systems
and providers that offer MMDS services, plus other organizations involved
in MMDS. These vendors are representative of the industry and do not constitute
a complete list.
Broadband
Wireless Internet Forum: Forum developing airlink standards for
MMDS systems
Cisco
Systems: MMDS equipment provider
Hybrid
Networks: MMDS equipment provider supplying Sprint
Iospan
Wireless: MMDS equipment provider
IPWireless:
MMDS equipment provider
NextNet
Wireless: MMDS equipment provider
Nucentrix
Broadband Networks: MMDS service provider
OFDM
Forum: Forum for the advancement of OFDM technology
Sprint
Broadband Direct: Leading MMDS service provider
Vyyo
MMDS equipment provider supplying WorldCom
Wireless
Communications Association International: Represents the fixed
broadband wireless access industry worldwide
WorldCom:
MMDS service provider
|
 |